* Thi UPS is an online double conversion UPS solution which offers premium power outage protection and continuous power conditioning in a compact and flexible deployment system. This single-phase UPS operates with high power efficiency is intended for both centralized and edge applications. It provides battery health status and replacement date prediction for intelligent battery health management. The unit includes a rack mounting hardware kit and base for tower installation in open environments. Scalable runtime options with matching external battery cabinets and hot-swappable internal batteries offer additional flexibility when extended uninterrupted power is required.
* Fearless power outage, power outage endurance, three-level lightning protection, overload protection
Model
TX05KS~TX10
Rate Capacity
500VA~10KVA
DC Rated DC voltage (Vdc)
24V/36V/48V/110V/220V
DC output range (Vdc)
24V/36V/48V/110V/220V-18%~24V/36V/48V/110V/220V+25%
DC Input feedback noise
When the input voltage and load current are rated values:<10%
AC Rated input voltage
220/230/240V AC
AC Input voltage range
145-286V AC
Phase
Single Phase
AC Input frequency range
50HZ±10%
AC rated power
400W~8000W
AC The output voltage
220V±2%(210-240V adjustable)
AC Output frequency
50HZ±1% (inverter output)
AC Waveform distortion
Sine wave, THD<3% (linear load)
AC Output power factor
0.8
AC conversion time
<10ms
AC Dynamic Transient Recovery Time
≤30ms
AC efficiency
>88% (80% resistive load)
AC Protect
DC anti-reverse connection, buffering, over- and under-voltage; mains input over- and under-voltage; output overload, short circuit; over-temperature and other protections
people and interfaces
LCD
Communication Interface
Standard intelligent RS232, RJ485
dry contact
Yes (optional)
Dielectric strength
Comply with EN50081-1/EN55022
Noise (dB)
<50
Operating temperature
—10℃~45℃
Storage temperature
—20℃~55℃ (before installation and startup, the bare metal needs to be left to let the machine warm up to room temperature above 0°C)
Relative humidity
0%~95% (no condensation)
Working altitude
The altitude should not exceed 1500m: if it exceeds 1500m, it should be derated according to GB/T3859.2.